STUDIO DUE Control Five, User'S And Operator'S Manual

Page: 16 / 27

If you wish to add the Shapes to other spots, select other spot/spots and repeat the same operations.
In case you deal the key SHAPES when not items are selected the message WARNING NOT ACTIVE
SPOTS will appears, and if the spots can not work with the shapes, having not the parameter pan and tilt
16BIT, the display points out the message WARNING. NOT SHAPE MODE.
All shape data and scene parameters are saved on memory.
7 – ADDITIONAL PROGRAMMING FUNCTIONS
DEL STEP function:
Press DEL STEP to cancel the current scene moving all the next scenes down.
The controller will show the request:
Press YES (F1) or ENTER to cancel the scene, press NO (F3) or ESC to leave the function without
canceling the scene.
COPY STEP function:
To copy a scene press COPY STEP.
The following menu will appear:
You have 3 options:
a) You can decide to copy from another scene in the current one
b) You can decide to copy the current scene in another one.
c) You can decide to copy the Shapes starting position
a) Pressing FROM (F1), the following menu will appear:
The controller requests to digit the number of the original program from which you want to copy the scene.
Digit the number and press OK(F1) or ENTER.
At this point the following menu will appear:
The controller requests the number of the original scene that you want to copy.
Digit the number of the scene and press OK (F1) or ENTER.
NOTE: if the original program hold only one scene the menu From Step can not be visualized and the
controller will pass directly to the next operation.
If the program is empty the original scene will be the only scene of the program and the function will end,
otherwise the controller will show the following menu:
14