Stryker 220-200-000, Service Manual

Page: 40 / 71

38
6.0 Jaw Handle
Seq. Task Description Figure Tools Needed Parts
700
Remove Jaw Handle from
Jaw Handle Key and Pinion
Sha
 as shown.
Make sure the Jaw
Handle Key remains in the
Pinion Sha
 groove
• 1/16” Hex
Wrench
• #6 x
¼
FLPT
SS BLK Set
Screw (002)
• Jaw Handle
(554)
• Jaw Handle
Key (641)
• X8000 Pinion
Sha  (298)
710
Place small amount of
Loctite 222 onto threaded
sha
 of new Jaw Handle,
then place Jaw Handle onto
Jaw Handle Key and Pinion
Sha
 as shown and screw
into place until secure.
Make sure that Loctite
does not get on the plastic
of Jaw Handle or damage
can occur.
• 1/16” Hex
Wrench
• Loctite 222
• #6 x ¼ FLPT
SS BLK Set
Screw (002)
• Jaw Handle
(554)
• Jaw Handle
Key (641)
• X8000 Pinion
Sha

(298)