Stryker 220-200-000, Service Manual

Page: 35 / 71

33
530 Get New Bulb Mount
Board. Place
 ermal
Switch Guide over  ermal
Switch and A/C Inlet
Board/Bulb Mount Board
Cable as shown.
Pass  ermal Switch
through opening in
 ermal Switch Guard as
shown!
•  ermal
Switch Guard
(596)
• Bulb Mount
Board (279)
540
Screw  ermal Switch
Guard onto Bulb Mount
Board.
Use a manual
screwdriver!
• Screwdriver
(Phillips)
• 4-40 x ¼
Nylon Phil.
PH Screws (2)
(448)
•  ermal
Switch Guard
(596)
550
Get new Bulb Mount
Board. Screw Bulb Mount
Board Assembly to Chassis
PEM’s above Rail Plate until
secure. • Power
Screwdriver
(Phillips)
• 6-32 x 5/16
PH Screw (4)
(102)
• X8000
Horizontal
Bulb Mount
Board
Assembly
(279)
• X8000 Rail
Plate (329)
560 Plug Stepper Motor
connector into Bulb Mount
Board connector J2 as
shown. Also, plug in A/C
Inlet Board/Bulb Mount
Board Cable -572 into Bulb
Mount Board and A/C Inlet
Board. • X8000 Stepper
Motor (341)
• A/C Inlet
Board/Bulb
Mount Board
Cable (572)
• X8000
Horizontal
Bulb Mount
Board
Assembly
(279)