Stryker Medical 2025, Maintenance Manual

Page: 11 / 140

Maintenance Procedures – Base
10
CASTER COVER INSTALLATION AND REMOVAL
Double Prongs
Single Prong
Push with palm on the cover
Properly Attached
Cover
To remove the wheel cover, insert a large screwdriver into the cut–out
1.
2.
3.
Looking through the larger of the two side cut–outs,
Top View (Cut–Away)
Top View (Cut–Away)
Top View (Cut–Away)
align the cover with the axle nut or bolt head, as shown.
Push down on the opposite side of the cover until the
single prong engages with the caster horn.
until the double prongs engage.
in the side of the wheel cover and into the space between the double
prongs. Pry up the cover to disengage the double prongs and push
sharply upward to disengage the single prong.