Stryker Medical 2025, Maintenance Manual

Page: 4 / 140

Introduction
3
INTRODUCTION
This manual is designed to assist you with the maintenance of the Model 2025/2026 Stryker Critical Care Bed.
Read it thoroughly before beginning any maintenance on the equipment.
SPECIFICATIONS
Maximum Weight Capacity 500 pounds (227 kilograms)
Weigh System Capacity (optional equipment) patients weighing up to 400 pounds or
patients weighing up to 181.5 kilograms
Weigh System Accuracy (optional equipment) 1% of total patient weight
Overall Bed Length/Width 91” x 40” (231 cm x 101 cm)
Patient Sleep Surface 84” x 35” (215 cm x 90 cm)
Minimum/Maximum Bed Height 22 1/2” to 35” (20 1/2” to 31” low height option) or
57 cm to 89 cm (52 cm to 79 cm low height option)
Knee Gatch Angle 0
_
to 35
_
Back Angle 0
_
to 90
_
Trendelenburg/Reverse Trendelenburg –12
_
to +12
_
(standard height)
–10
_
to +10
_
(low height option)
Electrical Requirements 115 VAC, 60 Hz, 6.0 Amps (without optional 115V outlet)
115 VAC, 60 HZ, 11.0 Amps (with optional 115V outlet)
or 230 VAC, 50/60 Hz, 4.0 Amps
Stryker reserves the right to change specifications without notice.
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make maintenance easier or important instructions clearer.
WARNING
Always apply the caster brakes when a patient is getting on or off the bed. Push on the bed to ensure the
brakes are securely locked. Always engage the brakes unless the bed is being moved. Injury could result
if the bed moves while a patient is getting on or off the bed.