Struers Unitom-50, Instruction Manual

Page: 41 / 225

Unitom-50
Instruction Manual
37
„
Press emergency stop.
„
Open the protection guard.
„
Remove the red protection caps from each of the two grease
nipples, located as indicated with a white circle in the photo.
„
Lubricate in the two grease nipples with the grease gun and
move the spindle/cutting motor up and down by hand, until
grease comes out at the shaft. Use water-repelling grease, e.g.
Shell Albida Grease LX.
„
Clean superfluous grease away and mount the protection caps
at the grease nipples.
„
Release the emergency stop.
Lubrication of Bearings for
Tilting Frame