Struers Unitom-50, Instruction Manual

Page: 12 / 225

Unitom-50
Instruction Manual
8
2. Basic Operations
A
START
s
/STOP
o
of Unitom-50
B
Position of the cut-off wheel
C
Programming and monitoring functions
A short beep when a key is pressed indicates that the
command has been accepted.
A long beep indicates that the key is inactive at the moment.
Three long beeps indicate that the cutting process is finished.
Using the Controls
Front Panel Controls of Unitom-50
Groups of Keys
Acoustic Signals
Location of the Main Switch
Please Note...
The contents of the program memory are not lost
when the main switch is turned off.