Struers Unitom-50, Instruction Manual

Page: 15 / 225

Unitom-50
Instruction Manual
11
The display can show various kinds of information, for example
parameters for an ongoing process. During the cutting process the
screen could look as the following example:
A
Heading.
B
Inverted text: cursor position.
C
Function key options.
Feed
The feed rate of the cut-off wheel pre-set before
starting the cutting.
Load
Load indicator of the cutting motor. The moving black
column shows the status of the cutting motor:
Inside the white area: The cutting motor can be loaded
continuously.
In the grey overload area: The cutting motor can only
be intermittently loaded. The built-in thermo fuse
might shut off the cutting motor.
Wheel Position
. The actual position of the cut-off wheel measured
from the top position of the cut-off wheel.
Stop Position
The pre-set stop position counted from the top
position of the cut-off wheel.
To increase the lifetime of the display, the backlight is
automatically switched off if Unitom-50 has not been used for 15
min. Press any key to re-activate the backlight.
Reading the Display
Reading the Display during the
Cutting Process
Sleep Mode
B
A
C