Struers Unitom-50, Instruction Manual

Page: 20 / 225

Unitom-50
Instruction Manual
16
„
Before starting, lower the cut-off wheel into the correct position
above the workpiece.
„
Close the protecting guard.
„
Press START
s
. The cut-off wheel starts rotating and the
cooling water starts running. The cut-off wheel moves down at
the pre-set feed rate.
You may increase the feed rate to twice the pre-set value between
pressing start and the cut-off wheel physically touching the
workpiece.
„
Press the function key F1. The cut-off wheel quickly moves
down until it touches the workpiece. Unitom-50 will then
automatically change the feed rate back to the pre set value.
e
Press ENTER
e
, to edit the value.
D
Two square brackets [ ] appear around the value.
mO
mN
Press MENU UP/DOWN
mON
to increase or decrease
the numeric value.
D
e
Press ENTER
e
, to accept the new value.
Pressing Esc, aborts the changes, preserving the
original value.
Starting the Cutting
Fast down
Setting the Feed Rate during
Cutting