Struers Accutom-5, Instruction Manual

Page: 38 / 236

Accutom-5
Instruction Manual
34
While working with a specific method, you can save the changes you
have made in the database.

As soon as a parameter is changed in a cutting method,
F4:SAVE will be shown on the bottom line of the display.
Cutting Method: 1. EMPTY METHOD

Wheel :
B0D15 Speed : 2700 rpm
Feed :0.200 mm/s Force : MEDIUM
Rotation: OFF
Water : ON
F4:SAVE

F4

Press F4:SAVE to save the changes after
all necessary parameters have been altered.

SAVE METHOD
Save changes in method
1. EMPTY METHOD ?
ENTER: YES ESC: NO


Press ENTER

to save the modified
method.

Unless you have already named the method, the name will
automatically change from EMPTY METHOD to
UNNAMED METHOD. This will always show that at least
one parameter has been changed compared to a default
method.
Method Options
Saving a Method
Important
When saving changes, the original method will be overwritten.
If you want to keep the original method, you should make a copy of the
method with a new name, thus making the changes in a copy rather than
changing the original method. See Copying a Method.