Struers Accutom-5, Instruction Manual

Page: 16 / 236

Accutom-5
Instruction Manual
12
The display can show various kinds of information, for example about
the cutting method or about the sample position. A screen for a
cutting method could look as the following example:
Cutting Method: 1. EMPTY METHOD

Wheel :
B0D15 Speed : 2700 rpm
Feed :0.100 mm/s Force : MEDIUM
Rotation: OFF
Water : ON





Pressing one of the X-axis positioning keys will change the
screen to the following:

 
X-POSITIONS

Absolute Position: 15.255 mm
Relative Position: 5.000 mm
F1:RESET F2:ADD F3:MOVE TO REL. ZERO




Pressing one of the Y-axis positioning keys will change the
screen to the following:

Y-POSITIONS

Absolute Position: 55.7 mm
Relative Position: 0.0 mm
Stop Position: 20.0 mm
F1:RESET F2:SET STOP F3:MOVE TO
REL.ZERO

Esc

Press Esc, to return to the cutting
method screen.
Reading the Display
The “heavy” arrows on the
display indicate the
direction in which the
sample holder is moved,
for example:
X-POSITIONS

Y-POSITIONS
