Struers Accutom-5, Instruction Manual

Page: 32 / 236

Accutom-5
Instruction Manual
28
See how to change the language in the Getting Started section of
this Instruction Manual.
After the stop position is reached, the sample is normally moved
straight back to the relative zero position. To avoid any contact with
the cut-off wheel during that movement, the sample can be retracted
from the wheel before it is repositioned by setting X-retract to ON.
After reaching the relative zero position, the sample is then moved
back into the original position.
The contrast setting of the display can be adjusted.
Pressing F1 will reset the inverted option to the factory adjusted
default value.
Options
Language
X-retract
IMPORTANT

Make sure that the Y-stop position is set correctly. If the sample is not cut
through before the sample is retracted the cut-off wheel might be damaged.
Contrast
F1: DEFAULT VALUE