Struers Abramin, Instruction Manual

Page: 22 / 137

Abramin
Instruction Manual
18
Manual preparation is possible as the grinding- and polishing disc
can rotate at both 300 and 150 rpm. The disc starts by pressing Disc
(150 rpm/300 rpm) and will operate at 150 rpm or at the pre-set
programmed speed as indicated with light diode. Water can be
added by pressing Water

. If the selected program step is
programmed for Doser, the water cannot be turned on and a long
beep-tone indicates this at the same time as the display shows Dose.
Disc and water are stopped by pressing Stop or by pressing Disc and
Water

once again.
Manual Preparation