STRONGA HookLoada HL180T, Operator'S Manual & Spare Parts Book

Page: 29 / 64

HL180T 28
Finally, retract
rear axle stabilizers
from axle and lock the container with
container
locking clamps
.
DANGER!
Do not operate the trailer if any components are damaged or broken.
WARNING!
When the stabilizers have retracted fully the warning triangle at the front of the
trailer will drop back down.
Switch off the PTO shaft (where is fitted).
Once all checks have been completed it is safe to drive off.
Drive the container to the place where the container has to be unloaded when the
telescopic bumper is mounted, it has to be slide into the short position.
The
unloading
of the trailer need to be performed contrary to the loading in the
following actions:
Switch on the PTO shaft (where is fitted).
Engage the rear axle stabilizers and open the container locking clamps . At the
same time the warning triangle pops up.
Push the hook tower frame back ensuring it reaches end of it’s travel. As soon as
the hook tower is pushed to its fully back position the tipping frame is unlocked.
Engage the
main cylinders
to move the
hook
with container behind the trailer.
Continue unloading and stop just on time when the container is
coming
completely on the ground .
WARNING!
If the container is completely on the ground and you still pushing middle frame
down, then the HookLoada trailer will be raised and the equipment can be
damaged.
Drive the tractor forward so that the container’s hookbar comes out of the hook .
Pull the loading middle frame back to rest on the chassis .