Strong SRT 5016, User Manual

Page: 7 / 20

PART 1 • English
4
n
Built-in UHF modulator
n
RS-232 port for updating control software and additional services
1
subject of local broadcast condition
* Depending from Broadcaster
Accessories:
n
User’s Manual
n
1 Remote control unit
n
2x Batteries (AAA type)
Note : The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or
used with other types of batteries.
2.0 CONNECTION
2.1 Connecting to Terrestrial Antenna
Fig. 1
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver.
2.2 Connecting to TV and VCR with SCART cable
Fig. 1
The TV set should be connected with the receiver through a SCART cable. This terrestrial receiver may
also be operated together with a VCR using the loop through function. The loop-through function of this
terrestrial receiver is active when the receiver is in Stand-By Mode. As soon as the VCR is turned on, its
video and audio signals are looped through the terrestrial receiver.
Optional 1 : using coaxial cable, connect TO TV output of the receiver to terrestrial input of your TV set.
This will allow you to watch digital programs from your receiver on an analogue TV set.
Optional 2 : using coaxial cable, connect TO TV output of the receiver to terrestrial input of your VCR and
terrestrial output of VCR to terrestrial input of your TV set. This will allow you to record the
digital program you are watching.
Optional 3 : using coaxial cable, connect TO TV output of the receiver to aerial input of your VCR and
terrestrial output of VCR to terrestrial input of your TV set. Using a short loop coaxial cable,
connect LOOP OUT output to LOOP IN input at the back of your receiver. This allows you to
watch and record analogue and digital terrestrial programs on your VCR.
2.3 Connecting to TV with RCA cable
Fig. 2
On the back of your receiver you will find the RCA connectors (Audio Left & Right - Red& white, Video
- Yellow). Install an audio/video cable between the RCA connectors of the receiver and those of your TV
set or amplifier.