background image

Environmental Issues

ENVIRONMENTAL ISSUES

STRONG is committed to reducing the impact of its products on the environment.
To maximise the benefits of our design enhancements, your co-operation is required.

Electronic product recycling

Do not dispose of this product with your 
domestic rubbish.

At the end of its useful life, this product 
contains materials which when processed 
correctly can be recovered and recycled. By 
participating in the responsible recycling 
of this product you will be reducing the 
requirement for new raw materials and  
reducing the amount of material that 
would otherwise end up in landfill.
When you purchase a new, similar product 
your retailer may offer to take this old one 
off you. Alternatively, you can take it to 
your local recycling centre. Your retailer or 
local municipal authority will advise you of 
the collection facilities available for waste 
electronically products in your area. User 
of this service will be free to you.

Within the scope of the European 
legislation on Waste Electrical and 
Electronic Equipment (Directive 2002/96/
EC valid as of August 2005) STRONG 
provides a recycling system free of charge 
for consumers to returning products after 
end of life. For more information about 
STRONG’s environmental policy to you:

www.strong.tv

 - select “

About us

” and 

Environmental Policy

“ from 

the submenu.

Packaging

 

When disposing of this 
product packaging, please 
ensure that it is recycled. 
Packaging material is to be 
depolluted in waste  
separation.

Power Saving

To save power and money, 
please put the product into 
standby mode when not in 
use. We also recommend 
disconnection from mains 
supply when not in use for longer 
periods of time.

Batteries

Do not dispose of the batteries 
from your handset with your 
domestic waste.

Where they are available, 
participate in your local municipal 
or retailer collection schemes 
for spent batteries. Batteries 
discarded in landfill sites or 
incinerated increases the chances 
of pollutants being dispersed into 
the atmosphere.

Alternations reserved 01/2008

Summary of Contents for SRT 5016





















Reviews: