Strong SRT 5016, User Manual

Page: 8 / 20

PART 1 • English
5
English
2.4 Connecting to a Digital Audio Amplifier
Fig. 3
Connect your digital Audio Amplifier with the S/PDIF connector on the back of the receiver
2.5 Connecting to PC
Fig. 4
Connect the RS-232 connector of the receiver to the PC using a serial cable. This allows you to
download new versions of software to your receiver.
3.0 YOUR RECEIVER
3.1 Front Panel
Fig. 5
1. Mode indicator
The RED light indicates that the receiver is in STAND-BY mode. The GREEN light indicates
that the receiver is in AWAKE mode.
2. Power ON/STAND-BY button
3.
Up/Down buttons
4. 4 digits display
In STAND-BY mode indicates current time
In AWAKE mode indicates current channel number
3.2 Rear Panel
Fig. 6
1. ANT IN
To connect an aerial antenna for receiving broadcasting signal.
2. LOOP OUT
If you want to use loop trough connect this output to LOOP IN connector.
3. LOOP IN
Input modulator.
4. TO TV (incl. modulator)
Connect this output to terrestrial input of your TV set. This connection will allow you to
watch analogue terrestrial programs, as well as to use the built-in modulator.
5. TV SCART Connector
To connect your receiver with your TV set using a SCART cable.
6. VCR SCART Connector
To connect your receiver with your VCR using a SCART cable.
7. AUDIO Right (Red RCA) and Left (White RCA)
These connectors give you the possibility to connect the audio signal to an external amplifier
or to the audio input of your TV.