Original assembly/operating instructions Gear limit switch Type series 51 • No. 151-00004 H • 01.2018
13
3
Transport and storage
3.1
Transport
NOTE
Be particularly careful when transporting the GCLS in order to avoid damage caused by external
forces or careless loading and unloading. Depending on the type and duration of the transportation,
corresponding transportation locks have been provided. Remove the transport lock only when
beginning assembly, see section 6.3.
The information marked on the packing pieces must be observed.
During transportation, avoid:
water condensation resulting from severe temperature fluctuations
impacts
3.1.1
Unpacking
The transportation route is decisive in terms of the type of packing. The information marked on the packing pieces
must be observed.
RECYCLING
Dispose of the packaging material according to the local guidelines properly and in an
environmentally-friendly way.
3.2
Scope of delivery
On receipt, check the delivery for completeness using the packing list. Possible damage during transportation
and/or missing parts must be reported immediately, see section 11.2 for the address.
3.2.1
Pre-mounting condition
The GCLS is supplied assembled and ready for operation, and is prepared for direct assembly in the machine.
NOTICE
Damage to the machine due to the incorrect adjustment of the GCLS
When the GCLS has not been adjusted, traverse movements of the machine can lead to damage.
Before commissioning the machine, always adjust the GCLS first in accordance with the
specifications in the mounting/operating instructions.
NOTE
At the customer's request, GCLSs can also be supplied in a defined basic position, e.g. for wind
farms. These GCLSs are equipped with a transport lock.
