Strobel 58-4, Operating Instructions Manual

Page: 7 / 30

3
BA_58_A17_161026_en
Operating Instructions
STROBEL Class 58
Contents
1 General notes on safety ............................................................................................ 5
2 General ..................................................................................................................... 7
2.1 Technical data ................................................................................................ 7
3 Starting up. Lubricating and cleaning machine ......................................................... 8
3.1 Rotation of machine ........................................................................................ 8
4 Instructions for use .................................................................................................... 9
4.1 Needles and Threads ..................................................................................... 9
4.2 Threading ....................................................................................................... 9
4.3 Setting stitch depth (Fig. 1 and 2) ................................................................... 9
4.4 Adjusting stitch length (Fig. 1) ...................................................................... 14
4.5 Device for changing from blind stitch to through stitch ................................. 14
4.6 Lowering the material support arm to lubricate the machine
(Fig. 2 and Fig. 3)
......................................................................................... 15
4.7 Padding instructions for Class 58-4 (Fig. 6 and 7) ........................................ 15
4.8 Thread trimmer (Fig. 8) ................................................................................. 16
4.8.1 Removing and remounting of the thread trimmer drive (Fig. 8) ........ 16
4.8.2 Adjustment (Fig. 8 and Fig. 9) .......................................................... 18
4.8.3 Replacing the knife (Fig. 8 and Fig. 9) ............................................. 19
4.8.4 Cutting position (Fig. 9) .................................................................... 19