16
EWS150 Configuration Guide
EWS150 Configuration Guide
Updating the Firmware
To update the EWS150 firmware, you must first establish the FTP file transfer parameters so that the unit
knows where to locate the new image file. To do this, click on the
Configure
tab then click on
Firmware
Updates
to display the Firmware updates window.
Figure 15. Firmware Updates Window
After entering the FTP location parameters, click on
Update
to apply your change then click on
Reboot
to
reboot the unit. When the unit has completed its reboot process, go to the home page and click on
Load
Firmware
to display the Load Firmware window. If you need to change the FTP location parameters, click on
the FTP Parameters link, otherwise click on the
Start Download
button to begin the firmware update
procedure.
Figure 16. Updating the Firmware
