EWS150 Configuration Guide
7
EWS150 Configuration Guide
Setting Up the System Management Options
The EWS150 can be managed from any of the following management options:
◗
Web
—from your Web browser using its embedded Web Management Interface (WMI).
◗
LAN
—This option allows you to manage the EWS150 using either Web, Telnet or SNMP with a direct
connection from the unit’s LAN port.
◗
SNMP
—Allows management via an SNMP (Simple Network Management Protocol) management
console. The EWS150 supports the 802.11 MIB (Management Information Base), as well as Strix
proprietary MIBs. Any MIB I or MIB II compliant SNMP management console (such as HP OpenView)
can be used to manage the unit.
To set up the system management options, click on the
Configure
tab then click on
Management
to display
the Management window.
Figure 7. Management Window
Enable or disable your preferred system management options, as desired. If you enable the Telnet option you
must also provide the Telnet timeout (in seconds)—the default is 180. If you enable SNMP management, you
must also provide the SNMP communities you are using and the system contact information. When finished,
click on
Update
to apply your changes then click on
Reboot
to reboot the EWS150. Only after the unit
reboots will you be able to manage the EWS150 from any of the selected management options.