44
BATTERY REPLACEMENT
First-time use:
Remove the plastic tab. This plastic
tab prevents the battery from draining and must be
removed before use..
STEP 1:
Use the small screwdriver to open carefully the
backside of the transmitter. Insert the screwdriver
into the hole between the cover and the base of the
transmitter. Squeeze the screwdriver in, meanwhile tilt
downwards to open the cover.
STEP 3:
Install the battery in the battery compartment
located at the back of the printed circuit board. Check
specifications for the correct battery.
STEP 2:
Unscrew the 2 small screws.
Remove carefully the printed circuit board.
STEP 4:
Place the printed circuit board back in the cover and fix it with
both small screws.
Close the back cover.
