39
Pairing Steps
Select the ringtone.
Activate the transmitter.
Hold the volume button
for 5 seconds.
STEP 1:
Select your favorite ringtone
before you start the pairing.
STEP 3:
Active the transmitter by
pressing the push button.
This will send a signal to the
receiver.
STEP 2:
Hold and press the volume
control button for 5s until a
“Ding-dong” is heard and the
LED indicator starts flashing.
You are now in the pairing
mode.
IMPORTANT REMARKS:
●
The pairing mode will quit automatically after the pairing is completed.
●
The pairing mode will last for 5 seconds only.
●
The transmitter supplied with this kit is already paired with the receivers and set to
the default ringtone “Dingdong”. If not, please refer to the “QUICK START” chapter to
pair the transmitter with the receivers and set your favorite ringtone.
