Varan 1.14, 1.20
Changes in models reserved.
Dimensions not binding!
22
Controller
Examples for possible programming in the ‚Program‘ sub menu
6.10 Time And Date
Choose the current time resp. the date with P4 (^) and P6 (v) and
confirm yourcelection with P3 (SET).
Use P1 (ESC) to leave this setting.
6.11 Remote Control
Activate or deactive the connection with the
remote control.
Pag 17/45
DMAN802000055- SY250 Hydro Technical Manual
8.2.8
Combustion Recipe Menu
Menu to select the Combustion Recipe. The maximum value is the number of recipes visible to the user. This
value can be set in System Menu Default Settings (parameter
P04
). If the parameter
P04
= 1 the Menu
isn’t visible.
8.2.9
Time and Date Menu
This Menu allows to set time and date. Push the button
P4
and
P6
to select hours, minutes, year, month
and day. Push
P3
to enter editing,
P4
and
P6
button to change the value. Push
P3
to save and
P1
to exit.
8.2.10
Remote Control Menu
This Menu allows to enable or disable the Remote Control SYTX.
8.2.11
Calibration Menu
This Menu allows to modify the Combustion Fan’s speed and the Auger’s work time set by factory. It has two
Submenu.
The system has 10 calibration’s steps (the 0 value is set by the factory). For each step the value is increased
or decreased of a per cent value (the per cent value is set in the Step Calibration Menu of System Menu).
The calibration’s effect is valid only in Run Mode and in Modulation for the current recipe.
8.2.12
Load Menu
This menu allows load manually the Auger or the brazier.
The loading stops automatically after 600 seconds.
The system has to be in Off State to do the
loading.
NOTE
: when the auger is manually started the Exhaust Fan switches on in order to close pins
13-14
(HV2)
for the power supply of the auger.
Time and Date
Remote Control
Calibration
_____
Load
Language
Auger Calibration
Fan Calibration
Time and Date
Remote Control
_______
Calibration
Load
Language
Remote Control
Enable
Disable
_
Time and Date
Remote Control
Calibration
Load
__________
Language
Load
ON
OFF
________________
Pag 17/45
DMAN802000055- SY250 Hydro Technical Manual
8.2.8
Combustion Recipe Menu
Menu to select the Combustion Recipe. The maximum value is the number of recipes visible to the user. This
value can be set in System Menu Default Settings (parameter
P04
). If the parameter
P04
= 1 the Menu
isn’t visible.
8.2.9
Time and Date Menu
This Menu allows to set time and date. Push the button
P4
and
P6
to select hours, minutes, year, month
and day. Push
P3
to enter editing,
P4
and
P6
button to change the value. Push
P3
to save and
P1
to exit.
8.2.10
Remote Control Menu
This Menu allows to enable or disable the Remote Control SYTX.
8.2.11
Calibration Menu
This Menu allows to modify the Combustion Fan’s speed and the Auger’s work time set by factory. It has two
Submenu.
The system has 10 calibration’s steps (the 0 value is set by the factory). For each step the value is increased
or decreased of a per cent value (the per cent value is set in the Step Calibration Menu of System Menu).
The calibration’s effect is valid only in Run Mode and in Modulation for the current recipe.
8.2.12
Load Menu
This menu allows load manually the Auger or the brazier.
The loading stops automatically after 600 seconds.
The system has to be in Off State to do the
loading.
NOTE
: when the auger is manually started the Exhaust Fan switches on in order to close pins
13-14
(HV2)
for the power supply of the auger.
Time and Date
Remote Control
Calibration
_____
Load
Language
Auger Calibration
Fan Calibration
Time and Date
Remote Control
_______
Calibration
Load
Language
Remote Control
Enable
Disable
_
Time and Date
Remote Control
Calibration
Load
__________
Language
Load
ON
OFF
________________
6.12 Calivration
Set the running time of the auger and the RPM of the
fan. Coose from 10 calibration levels (the setting ex
factory is ‚0‘). Increasing or decreasing the value by
‚1‘ relates to an increase or decrease of 1%. This re-
lative percentage can be adjusted (‚Calibration Step‘
in the system menu). The calibration effect is only
active in operating mode and in pellet modulation.
