manualshive.com logo in svg

Strebel VARAN 1.14, Installation And User Manual

Share
Download
Strebel VARAN 1.14 Installation And User Manual Download Page 18

Varan 1.14, 1.20

Changes in models reserved.

Dimensions not binding!

18

6 Controller

The operating parameters the user has access to are visible on the screen. Additional parameters which influence boiler operation are 
reserved for qualified personnel ans must not be changed without reasons.

6.1 Controller Display

Controller

Controller panel with buttons and screen

Button

Functions

Description

P2 (ON/OFF) Activating/Deactivating, 

reset alarm

Hold button (about 3 sec.) until a sound is audible.

P4 (

^

)

P6 (v)

Sub menu selection, 
parameter selection
change of parameter

Move through the menu.
Change the values of parameters (increase/decrease).

P1 (ESC)

Leave, cancel

Leave current menu.

P3 (SET)

Confirm

Confirm/Access the current selection. Save changes.

P5 (#)

Time programme

Activating/Deactivating of the individual time programmes.

Summer/Winter mode

Time programme

Date/Time

Current operation phase

Service display

Alarm

Preset temperature

Current temperature

Activated parts

Pellet auger

Power level and opera-
tion mode (auto/man)

P1

P4

P2

P5

P3

P6

Summary of Contents for VARAN 1.14





































Reviews:

No comments

Brands by name

Popular brands

Load more brands