54
A P P L I C A T I O N A N D O P E R A T I O N
E N
▷
Check if the C/L drain pipe is free of obstruc-
tions and if the piping on the outside is securely
connected.
▷
Attach the splash guard [4] to the extraction
opening and lock it with lever [5].
▷
Transfer the milling file for wet processing.
6.1.2
Switching from wet to dry processing
Fig. 13
1
Extraction hood
2
Lever of the extraction hood
3
Swarf sieve
4
Splash guard
5
Lever of the splash guard
B
Service button
▷
Release lever [5] and pull off the splash guard
[4] toward the front.
▷
Remove the swarf sieve [3].
▷
Clean and dry the milling chamber and the swarf
sieve (see page 62).
▷
Insert the blank and insert or change the tool-
ing, as required.
▷
Mount the white extraction hood [1] to the
extraction opening and lock it in place with lever
[2].
▷
Check the air extraction.
▷
Transfer the milling file for dry processing.
5
2
B
1
4
3
1.
5.
3.
2.
4.
The swarf sieve [3] is not required for dry
processing.
