40
M A C H I N E S P E C I F I C A T I O N S
E N
4
Machine Specifications
4.1
Milling machine
4.1.1
Delivery Scope
_
Milling machine
_
Mains cable
_
USB cable (5 m)
_
Network cable (5 m)
_
Control cable, extraction
_
Compressed-air hoses (250 mm and 2000 mm)
_
Cleaning hose with brush head
_
Service unit
_
Service set for Jäger spindle
_
Blank template, zirconium oxide opaque
_
Test blank
_
CNC cutter, 2.5 (milling tool mounted in collet)
_
Screw set
_
Torque wrench, 4 Nm
_
Blank holder 71
_
Extractor adapter
_
Extraction hood
_
Drain cover
_
Slide caliper
The milling machine is delivered with a test blank
inserted in the blank holder. Prior to delivery, a
test object was factory-milled in order to check
the zero point settings. Possibly remaining milled
shavings/chips are not a reason for rejection. The
test blank is provided for test milling and calibra-
tion of the milling machine.
▷
After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.
4.1.2 Intended Use
The milling machine is a PC-controlled milling and
grinding machine for the fabrication of dentures
by means of:
_
Dry processing of blanks made of
▪
pre-sintered zirconium oxide
▪
unsintered non-precious metals (NPMs)
▪
wax
▪
plastics
_
Wet processing of blanks made of
▪
sintered glass ceramics
▪
plastics
Using blanks and tools not approved by the manu-
facturer can damage the machine and make the
product unusable. For such cases, the manufac-
turer shall assume no liability whatsoever.
Unauthorised modifications/alterations of the
machine shall also void the warranty.
Dry processing is permitted only in conjunction
with an appropriate extraction system (for techni-
cal requirements, see page 49).
Wet milling and grinding is permitted only in con-
junction with the supply unit (accessory).
This User Manual describes different mod-
els of the milling machine. Therefore, the
representations can deviate from the
actual appearance of the machine.
A compressed-air connection is required
for operation of milling machine (see
page 48).
