5
WALL ASSEMBLY
10x16 self-drilling screw
Wall Channel
Corner Wall Sheet
Split Wall Sheet
Wall Channel
Wall Sheet
Once all Wall Sheets are lapped the Wall Channels can be fitted. Fit the
Wall Channel over the lapped Wall Sheets. The end of the Wall Channel
should fit up against the end of the Corner Wall Sheet (Figure 1.6).
End View
Wall Channel
Figure 1.3
Note: All Handi-Mate™ walls are assembled in the same
manner. Refer to “Handi-Mate™ Model Sizes” section for
specific wall sheeting quantities & configurations.
Handi-Mate Window Assembly
Stratco Shed Windows are avaliable as an optional add-
on. Refer to the “Window Installation” section at the
end of this document if installing a Stratco Window, or
visit a Stratco store for more information.
Figure 1.6
When assembling the Wall and Door Sheets, lay the sheets down on
trestles
/
blocks (Figure 1.4). This will make assembly easier and reduce the
risk of damage to components.
All underlap sheets can be identified as
having a stepped ridge.
Corner Wall Sheet
Trestles / Blocks
Figure 1.5
Figure 1.4
Ignore
Wall Channel
Pilot hole
Figure 1.7
Place the Corner Wall Sheet down first. Lay the next Wall Sheet
overlapping the Corner Wall Sheet (Figure 1.5). Subsequent Wall Sheets
can be overlapped in the same manner. Refer to “Handi-Mate™ Model
Sizes” section for specific wall sheet configurations.
Ensure pre-made pilot holes in the Wall Channel line up in the centre of
the Wall Sheet crests (Figure 1.7). Pulling the Wall Sheet into place may
be required to achieve this.
Note: Ignore the final two holes at the ends of the Wall Channels.
