9
Crest-fix 10x16 wafer screws through the Top Door Channel and into the
ridges either side of the Door Roller (Figure 3.9).
Handle Mount
Using the pilot holes in the Handle Mounts as a guide, drill a
ø
3.5mm pilot
hole, then
ø
12mm hole through the wall sheet (Figure 3.11).
Figure 3.11
Coloured Rivet
A coloured rivet should be used to join sheet overlap together (Refer
Figure 1.9).
Figure 3.12
Top Door Channel
10x16 wafer screws
Figure 3.9
Vertical Door Channel
10x16 wafer screws
Figure 3.10
Crest-fix two 10x16 wafer screws through the pilot holes in each side of the
Handle Mounts (Figure 3.10).
ERECTING WALL ASSEMBLIES
The wall assemblies can now be joined together.
Wall Assemblies should be erected and joined together in the order indicated
by the numbered arrows below (Figure 4.0).
Left Wall
Front Wall
Fit the Corner of the Front Wall over the left side Wall Sheet (Figure 4.1).
Figure 4.0
Figure 4.1
1.
2.
3.
Front Wall
Left Wall
Right Wall
Rear Wall
4.