17
Figure 5.3
Wall Channel
Wall Channel
Window
Figure 5.4
The window flashing must be fitted from the inside of the shed. Fit the
short face of the flashing between the window and the cut edge of the
Wall Sheet. Secure the flashing to the Wall Sheet with four evenly spaced
rivets. Ensure all rivets are crest-fixed through to the sheets (Figure 5.4).
Fit the window within the opening. Ensure the top lip of the window is
fitted between the Wall Channel and Wall Sheets. A minimum of four
evenly spaced rivets must be used along each side of the window frame. All
fasteners must be fixed through the crests of the Wall Sheets (Figure 5.3).
SHED MAINTENANCE
Your Stratco Handi-Mate
TM
Shed will maintain its good looks for even
longer with a simple wash and wipe down. Cleaning should be performed
as often as is required to remove any dirt, salt and pollutants.
Stratco Handi-Mate
TM
Sheds are produced from the highest quality
materials and will provide many years of service. Refer to the ‘Selection
Use and Maintenance’ brochure for more information on how to get the
best out of your product.
PROFILE
DESCRIPTION
PRODUCT CODE
Door Handle
HMTH
Door Tongue
HMDT
Door Latch
HMDL
Handle Mount
HMDM
Corner Bracket
HMCB
Door Jamb
HMDJ
Door Shroud
HMDSHDRBO
Top Door Channel
HMDCTO
Bottom Door Channel
HMDCBO
Vertical Door Channel
HMDCVE
Wall Channel
HMWC
Bottom Channel
HMBR
COMPONENT INDEX