15
R/H Barge Cap
L/H Barge Cap
Barge Support
Figure 5.21
Place the left & right Barge Caps over the roof sheets at the front of the
shed. The front face of the Barge Caps should fit up against the Barge
Support (Figure 5.21).
630mm
Door Jamb
Door Stop
Door Stop
10x22 wafer-head screw
Figure 5.16
Fasten the Door Stop to the Sliding Rail with a 10x22 wafer-head screw
spaced 630mm away from the Door Jamb (Figure 5.16).
Figure 5.17
Fasten the Door Handle to the Handle Mount with two 10x22 wafer-head
screws (Figure 5.17).
25mm
Door Tongue
Door Tongue
Screw
Door Handle Shaft
Door Handle
Handle Mount
10x22 wafer-head screw
Figure 5.18
Fit the Door Tongue over the Door Handle shaft. Ensure the Door Tongue
is oriented parallel to the Handle. Fit the Door Tongue approximately
25mm from the Door. Tighten the Door Tongue screw on the Door
Handle shaft to secure the Door Tongue in place (Figure 5.18).
Door Latch
Door Jamb
10x16 self-drilling screw
Figure 5.19
Close the Door and rotate the handle so that the Door Tongue is
horizontal. Using the Door Tongue as a guide, fasten the Door Latch to
the Door Jamb with two 10x16 self-drilling screws (Figure 5.19).
Door Shroud
Runner Rail
10x16 self-drilling screw
Figure 5.20
Fasten the Door Shroud to the back face of the Runner Rail with two
10x16 self-drilling screws (Figure 5.20).
