Objet260 User Guide
6 Operating and Maintaining the Objet260 3D Printer
DOC-37004 Rev. E
6-18
After clicking
Apply
, the
Material Replacement Options
screen appears, but
now, each material selection box corresponds to one of the cartridge levels in
the material cabinet.
Figure 6-15 Manual cartridge placement
Material for
Single Material
mode
If you regularly use a certain material for printing models in
single material
mode, and if this material is currently loaded in the printer, you can select it
from the drop-down menu. The wizard will take this into account when
determining the new cartridge locations. When possible, the selected material
will remain in parts of the system (cartridge slots, tubes, print block) so that it
is available when next needing it. This option is recommended if you often
switch between
single
and
multiple-material
modes because it can reduce the
amount of material flushed during replacement.
Additional
Flushing Cycles
The flushing cycle you select in the
Material Replacement Options
screen
determines how thoroughly to flush out material currently in the system.
After selecting the
Economy
cycle and completing the wizard, you might
decide that you require a more thorough flushing, to ensure accurate model
color. Or, you may notice that printed models are not satisfactory because
they contain traces of the previous material. If so, you can flush out more
material, so that the next models will be printed with pure material.
To perform additional flushing cycles:
➢
In the
Advanced Settings
screen, select
Enable "flush again" options
and
click
Apply
.
The
Material Replacement Options
screen appears, where you can select the
material(s) you need to flush again.
