Objet260 User Guide
2 Safety
DOC-37004 Rev. E
2-3
Grounded Chassis
The chassis of the printer is grounded, to prevent electrical
shock.
Note:
The power outlet must be properly grounded, in
accordance with the local electric code, to provide this
protection.
If the Objet260 3D printing system is not used as specified in this guide,
the safety features may not provide adequate protection.
Symbols and Warning Labels
This following table lists the warning labels located on or in Objet260
printers.
Warning Symbol
Meaning
Location
Comments
Hazard (general)
On the name plate on the
back of the printer.
Read the instructions in
this document before
operating the printer.
Hot surface
On the print block.
Risk of burns. Do not
touch this surface after
printing.
High voltage
Near the UV lamp
connectors.
Near the power-supply
enclosures.
Risk of electric shock.
Ultraviolet
radiation
Near the UV lamps.
Risk of injury from
ultraviolet radiation.
Moving parts
On the panel that is
visible when you open
the front doors of the
printer.
Risk of injury from moving
parts.
