Objet260 User Guide
6 Operating and Maintaining the Objet260 3D Printer
DOC-37004 Rev. E
6-11
5. If, for any reason, the correct number does not appear in the dialog box,
enter the number and click
OK
.
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer
interface, even if the server computer displays the
Continue from Slice
confirmation dialog box.
• There was a relatively long interruption in printing, even if the “last slice”
and “continue from slice” indicators are correct. The part of the model
already printed may deform or shrink, and there might be a visible
difference between it and the newly printed part. The effects of a printing
stoppage on a model depend on the model size and structure, Model
material used, ambient temperature and the length of the stoppage.
If you cannot continue printing:
1. Cancel the print job in the
Job Manager
screen.
2. Remove the partially printed model from the build tray.
3. Restart the job from the
Job Manager
screen (in Objet Studio).
You can stop and later resume printing from either the printer interface or
from the
Job Manager
screen of Objet Studio. After clicking the
Stop
button on the printer interface, you can resume printing only from the
Job
Manager
screen. However, after clicking the
Pause
button in the printer
interface, you can only resume printing from the printer interface.
