18
9.
Click on the
Use the following IP address
option.
10.
Enter the IP address, Subnet Mask and Default Gateway. Contact your IT Administrator or
Internet Service Provider for details regarding IP address information. The IP address should be
different from the workstation, the default gateway and subnet mask should match the
workstation. Enter the IP address, default gateway and subnet mask.
11.
Click on the
OK
button when finished. Close any open networking windows.
Setting the static network in Windows 7:
1.
From your workstation click on the
Start Menu
.
2.
Click on the
Control Panel
button.
3.
Double click on
Network and Internet
.
4.
Double click on the
Network and Sharing Center
icon.
5.
Double click
Local Area Connection
.
6.
Click on the
Properties
button.
7.
Select
Internet Protocol Version 4 (TCP/IPv4)
from the list.
8.
Click on the
Properties
button.
9.
Click on the
Use the following IP address
option.
10.
Enter the IP address, Subnet Mask and Default Gateway. Contact your IT Administrator or
Internet Service Provider for details regarding IP address information. The IP address should be
different from the workstation, the default gateway and subnet mask should match the
workstation. Enter the IP address, default gateway and subnet mask.
11.
Click on the OK button when finished. Close any open networking windows.
Setting the static network on printer:
1.
Obtain your static network address from your Network Administrator.
2.
From
Idle
(or
Ready to Build
), press
Maintenance
on the display panel. The display will show
Maintenance
and the software version.
3.
Press
System
.
4.
Press
Set Network
. The top window displays:
Network Admin - Static IP Address; UDN.
5.
Press
Static IP
to display default settings.
IP Address:
172.016.075.020 or 198.000.000.001
NM Address:
255.255.000.000
GW Address:
172.018.100.002
6.
Update the
IP address:
Press
Increment
to increase the value one digit at a time.
Press
Next Digit
to move the cursor one place to the right.
Press
Last Digit
to move the cursor one place to the left.
Note:
These values are the factory defaults and MUST be changed. If these values are
not changed the printer will continue to restart until they are changed.
Note:
The IP address should be different from the workstation. The default gateway
and subnet mask should match the workstation. Enter the IP address, default gateway
and subnet mask.
