14
Figure 11
Connecting power
Powering on the printer
1.
Switch the circuit breaker to the on (I) position. Power is now supplied to the system. The system
is ready to be ‘Powered ON’. See
Figure 12.
Figure 12
Location of circuit breaker
WARNING:
The build chamber and extrusion-head tip get very hot! The chamber and
head tip reach temperatures of approximately 75° C (167° F) and 280° C (536° F)
respectively. Personal injury can occur if proper techniques and safety materials are
not used. Use the leather safety gloves provided in the Startup Kit when working
inside the printer.
