manualshive.com logo in svg

Strata CIX100, General Description Manual

Share
Download
Strata CIX100 General Description Manual Download Page 89

Features

Handsfree Answerback

Strata CIX General Description

75

The Strata CIX allows the system-numbering plan to be customized for the user’s needs. Directory 

numbers, line and feature access codes, and Network Coordinated Numbering can be established 

uniquely in each system.

Handsfree Answerback

System Availability: All systems

When a voice-announced internal [DN] call comes in to a digital telephone, users can answer 

without lifting the handset. Cordless and single line digital telephones and standard telephones are 

not compatible with this feature.

Headset

System Availability: All systems

3000-series digital telephones may be optionally equipped with a modular headset jack by 

installing a BHEU circuit card.
IP telephones and DP5000-series digital telephones have a built-in headset adapter and therefore 

require only the headset.

Hearing Aid Compatible

System Availability: All systems

All Toshiba digital telephones are hearing aid compatible.

High Call Volume Buttons

System Availability: All systems

Release

, 

Release/Answer

, and 

Cancel

 buttons can be assigned to digital telephones. They 

enable a busy user to handle calls quickly and efficiently in high call volume situations. 
With one touch of the 

Release

 button, a user can disconnect from a call. This is especially useful 

in headset applications. The 

Release/Answer

 button disconnects or transfers the current call, 

and answers the next. The 

Cancel

 button voids the last operation, such as disconnecting internal 

or external parties from conference or tandem calls.

Hold

System Availability: All systems

There are several variations of Hold:

Automatic Hold

This option enables a user to place a CO Line or [DN] call on Hold by pressing another CO Line or 

[DN] button. The user can then alternate between the new and the old call by pressing the desired 

Line

 or [DN]. If this feature is not activated, users must press 

Hold

 before accessing another line 

and switching between calls.

Summary of Contents for CIX100





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands