manualshive.com logo in svg

Strata CIX100, General Description Manual

Share
Download
Strata CIX100 General Description Manual Download Page 22

Strata CIX670 and CIX1200

CIX670 Processor Circuit Cards

8

Strata CIX General Description

CIX670 Processor Circuit Cards 

The system operates with the BCTU only or the BCTU and BEXU processor circuit cards that 

install in dedicated slots of the Base Cabinet. The BCTU and BEXU processor incorporates the 

following on-board hardware features:

CPU/Memory

The CIX670 uses a high-speed, 32-bit, Reduced Instruction Set Computing (RISC) processor, 

Dynamic Random Access Memory (DRAM) working memory, Static Random Access Memory 

(SRAM) with lithium battery for back-up memory and flash program memory.

Large-scale Integrated (LSI) circuits

The processor has LSI circuits that support the following:
• BCTU provides 16 built-in DTMF receivers; 32 available using the BCTU and BEXU. For five 

or more DTMF receivers, appropriate licenses are required. 

• BCTU provides 16 built-in Busy Tone (BT) detectors for Auto Busy Redial (ABR); 32 

available using the BCTU and BEXU.

• BCTU provides 64 built-in conference circuits; up to 96 conference circuits are available using 

the BCTU and BEXU. 

• Built-in, adjustable, digital volume PAD technology enables audio volume to be adjusted in 

eight steps to compensate for conference and/or CO line network losses. 

Memory Protection Battery

If commercial AC power is lost or if a system is moved or stored without power, the processor has 

an internal battery that protects data and the customer’s programmed configuration from memory 

loss. This information will be maintained in a powerless system for at least six years.

Music-on-hold/Background Music Interface

An RCA jack and volume control are built into the processor to interface with a Music-on-hold 

and/or Background Music source. With the CIX670, you can have up to 15 MOH/BGM sources by 

adding:
• Up to two BIOU circuit cards, each provides three MOH/BGM input sources.
• A BSTU or any analog station card that provides up to eight MOH/BGM input sources.
• MOH/BGM source volume adjustment is controlled by software programming.

Secure Digital (SD) Memory

The BCTU processor has an on-board Secure Digital card slot. A SD flash memory card can be 

inserted to backup and restore customer program data. It also makes it easy to upload operating 

system data for software upgrades and is used for maintenance functions (see 

“System Fault 

Finding and Diagnostics” on page 103

 for more details).

Summary of Contents for CIX100





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands