Strata CIX100 General Description Manual Download Page 149

Page: 149 / 164

Appendix – Specifications

Capacities

Strata CIX General Description

135

6. DTMF receivers are required for standard touch tone telephones, voice mail integration, Tie, DID and DISA

lines.

7. Capacity includes standard telephones with or without Caller ID interface. Caller ID interface requires R4.1 or

later software.

8. DTMF receivers are required for standard touch tone telephones, voice mail integration, Tie, DID and DISA

lines.

Table 33

Line Capacities and Universal Circuit Card Slots for Strata CIX100

Lines

CIX100 Base & Expansion

CO lines – loop start

(analog - 8 lines/slot)

CO lines – ground start

(analog - 4 lines/slot)

DID lines (analog - 4 lines/slot)

Tie lines (analog - 4 lines/slot)

T1 lines (DS-1)

1. T1 lines can be loop start, ground start, Tie or DID (maximum 24 lines per unit, any type or combination).

ISDN PRI B channel lines

2. PRI lines provide CO line services, including Strata Net Networking, Calling Party Number/Name, DID, Tie, POTS,

FX and DIT.

Strata Net IP

Channels

3. IP Strata Net channels provides CIX networking functionality.

SIP Trunking

Total lines (Analog, T1, and ISDN PRI B channels

combined)

Channel Groups

Number of groups w/ GCO Line buttons

Busy Tone Detectors

Summary of Contents for CIX100





































































































































































Search results

Summary of Contents for CIX100

Reviews:

Brands by name

Popular brands

Strata CIX100, General Description Manual

Search results

Summary of Contents for CIX100

Reviews:

Brands by name

Popular brands