manualshive.com logo in svg

Strata CIX100, General Description Manual

Share
Download
Strata CIX100 General Description Manual Download Page 70

Features

Automatic Callback (ACB)

56

Strata CIX General Description

Automatic Callback (ACB)

System Availability: All systems

When a station user dials a busy station [DN] or outside line access code and receives busy tone, 

ACB can be activated by pressing an ACB feature Soft Key or by dialing 

4

. When the busy [DN] 

or outside line becomes available, the station will be automatically called back and be connected to 

and ring the originally called station or receive dial tone from an outgoing line.
When ACB is activated, the calling station receives success tone followed by busy tone. Once 

ACB is activated, the caller can hang up. ACB can be canceled any time using an access code. It 

will also cancel automatically after a predetermined time.

Automatic Line Selection

System Availability: All systems

This feature automatically connects a telephone to a specific line or extension button when the user 

lifts the handset off-hook, presses the 

Spkr

 (speaker) button, or presses a digit on the dial pad (Hot 

Dialing). This feature is necessary to make telephone operation consistent for the user because a 

telephone can have up to 20 line and extension buttons. Each telephone can be assigned in system 

programming with various options that determine what type of line or extension button is selected 

when the user takes the handset off-hook to make or answer calls. 
When answering calls, this option can be set to answer the call or not when a call rings the 

telephone and the user takes the handset off-hook. If the option is set to not answer automatically, 

the user can press the ringing button on the telephone to answer manually. With Automatic line 

selection, if more than one type of call is ringing simultaneously on the telephone, this option 

selects which type of call will be answered as a priority, then the longest ringing call in that call 

type will be answered first. 
Automatic line selection options are set independently for each telephone, for originating new 

calls and answering ringing calls. This feature can also be disabled on all or selected telephones to 

allow users to manually press a button to originate or answer calls.

Summary of Contents for CIX100





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands