4.0
1.6
180-210
18-20
35-45
18-22
18-22
6.0
1.2
220-250
24-25
50-60
18-22
16-24
6.0
1.6
220-240
20-24
37-50
18-22
16-24
8.0
1.6
250-300
25-26
60-65
18-22
16-24
12.0
1.6
300-400
26-28
65-75
18-22
16-24
4.10 Operation environment
4.11 Operation Notices
•
Height above sea level
≤
1000 M
•
Operation temperature range -10
〜
+40°C
•
Air relative humidity is below 90 %(20°C)
•
Preferable site the machine some angles
above the floor level, the maximum angle
does not exceed 15°C
•
Protect the machine against heavy rain
AND against direct sunshine.
•
The content of dust, acid, corrosive gas in
the surrounding air or substance cannot
exceed normal standard.
•
Take care that there is sufficient ventilation
during welding. There must be at least 30cm
free distance between the machine and wall.
•
Connect the ground wire with the machine
directly.
•
Ensure that the input is single-phase:
50/60Hz, 110V/220V ±10%.
•
Before operation, none concerned people
should not be around the working area and
especially children. Do not watch the arc in
unprotected eyes.
•
Ensure good ventilation of the machine to
improve Duty Cycle.
•
Turn off the engine when the operation finished
for energy consumption efficiency.
•
When power switch shuts off protectively
because of failure. Don’t restart it until problem
is resolved. Otherwise, the range of problem
will be extended.
•
In case of problems, contact your local dealer if
no authorized maintenance staff is available!
•
Read Section 1 carefully before starting
to use this equipment.
51
www.strata.co.nz
ADVANCEMULTI205P
