4. Operation of MMA welding method
1. Selection of the welding method:
2) In the function selection interface, rotate
the knob to select the MMA welding method,
shown below:
2. Setting the welding current:
1) In the main interface, press the key to
enter the welding interface.
In the welding interface, rotate the knob to select
the welding current shown below:
Explain: the welding parameters ,such as hot
start /arcforce/ duty and frequency, have been
set in the factory. You can go to the third step
to adjust.
3. Selection and setting of welding
parameters:
1) In the welding interface, press the right
button to enter the welding parameter setting
interface.
2) In the welding parameter setting interface,
press the knob to select the parameter as
required and rotate the knob to set a value for
the parameter.
30
www.strata.co.nz
ADVANCEMULTI205P
