Switch the ON/OFF Switch (located on
the rear panel) to OFF.
(1) Connect the earth lead to
“+”,
tighten
clockwise; Connect the earth clamp to
the work piece. Contact with the work
piece must be firm contact with clean,
bare metal, with no corrosion, paint or
scale at the contact point.
(2) Connect the TIG torch cable to
“-”,
tighten clockwise.
(3) Connect TIG torch remote plug to
remote socket
，
ensuring all connections
are tight
(4) Connect TIG torch gas connection to the
TIG gas outlet, ensuring all connections
are tight. Set the remote switch to
'on' /'off ' position as required.
(5) Connect the gas regulator to the Gas
Cylinder and connect the gas line to the
Gas Regulator.
(6) Connect the gas line to the machine inlet
gas connector via the quick push lock
connector located on the rear panel.
Check for Leaks
(7) Connect the power cable of welding
machine with the output switch in
electric box on site.
41
www.strata.co.nz
ADVANCEMULTI205P
