Note if this connection is not made, there will
be no electrical connection to the welding
torch!
(4) Connect the gas regulator to the Gas=
Cylinder and connect the gas line to the Gas
Regulator. Check for Leaks!
(5) Connect the gas line to gas connector on= the
rear panel. Check for Leaks!
(6) Connect the power cable of welding
machine with the output switch in electric
box on site.
2.5 Equipment Connection
2.5.1 Set up installation for MIG Welding- Gas shielded wire
(1) Insert the earth cable plug into the
negative socket on the front of the
machine and tighten it.
(2) Plug the welding torch into the MIG
torch connection socket on the front panel
and tighten it.
IMPORTANT: When connecting the torch
be sure to tighten the connection. A loose
connection can result in the connector
arcing and damaging the machine and
gun connector.
(3) Connect the MIG power connection
lead to the positive welding power output
socket.
20
www.strata.co.nz
ADVANCEMULTI205P
