(1) Insert the earth cable plug into the Negative socket on the front of the machine and tighten it.
(2) Connect the Spool Gun to the Mig torch connection socket on the front panel and tighten it.
IMPORTANT :
When connecting the torch be sure to tighten the connection. A loose connection
can result in the connector arcing and damaging the machine and gun connector.
(3) Connect the Spool Gun control cable to the multipin receptacle on the front panel .
(4) Connect the MIG power connection lead to the positive welding power output socket.
(5) Connect the gas regulator to the Gas Cylinder and connect the gas line to the Gas Regulator.
Check for Leaks!
(6) Connect the gas line to gas connector on the rear panel.
Check for Leaks!
(7) Connect the power cable of welding machine with the output switch in electric box on site.
(8) Spool Gun Switch turn on (up).
(9) Take the Spool Gun and remove the spool cover .
28
www.strata.co.nz
ADVANCEMIG 255C
