5
. Function icon display interface:
an interface displaying the icon of the welding method
currently used.
6
. Welding mode icon display interface:
an interface displaying the icon of the welding mode
currently used (2T/4T).
7
. Synergic parameter display interface:
an interface displaying the synergic parameters
currently used (only available when MIG/MAG Synergic welding method is selected).
8
. Multifunction display interface:
an interface displaying the contents corresponding to those
selected by users, such as icons of welding method, welding mode and parameter, parameter
values, etc.
Note: 1. In the welding process, press the MENU key to return to the main interface and
re-set parameters, and then press the ENTER key to enter the welding interface;
2. In the function selection interface, rotate L Knob to select a welding method as
required and press L Knob two times to directly enter the welding interface.
12
www.strata.co.nz
ADVANCEMIG 255C
