Contact Power Pack Sensor System
Installation & Operation Guide
17
Selecting Devices
To select devices for programming (e.g. single occupancy, all occupancy, photocells, or
switches), use the FIELD SELECT button on the IR Remote. Devices may also be individu-
ally selected by use of the remote laser.
Note:
The unit will always start in Single Occupancy Mode.
To change the selected devices to be programmed:
Step 1. Enter Programming Mode. (Refer to previous section.)
Step 2. Press FIELD SELECT button to toggle through modes:
Blue = Single Occupancy Sensor *
Blue/Red = All Occupancy Sensors on network *
Red = Switches on network
Green = Photocell/Dimming
*
Additional Occupancy Sensors may be added or removed by using the laser to tog-
gle sensors (
blue
= included).
Summary of Contents for Contact Power Pack
Page 1: ......
Page 47: ...Contact Power Pack Sensor System Installation Operation Guide 45 NOTES...
Page 48: ...Part No 2 450213 010...
