3.5" 3Gbps-Speed SATA Mirror Drive Model User’s Manual
7. After confirming that the host computer recognizes the
SATA Mirror Drive
, insert the
replacement drive. With the lever closed, push the replacement drive firmly right into the unit
using both hands.
8.
Several seconds after replacing the drive unit, data reconstruction will start. The drive status
indicator of the replacement drive unit will flash orange (@1 second interval).
Important
Do not remove the drive unit while data reconstruction is underway.
9. During
data
reconstruction, the drive status indicator of the replacement drive will flash orange,
while the drive status indicator of the other drive unit will light green. The access indicator will not
light.
10. When data reconstruction is complete, the drive status indicator will go out.
After confirming that the drive status indicator has gone out, turn off the power supply of the host
computer.
11. Hold the lever of the un-replaced drive unit and pull it out.
Push in.
(E.g.) When drive unit 2 failed after drive unit 1.
22