3.5" 3Gbps-Speed SATA Mirror Drive Model User’s Manual
7. Confirm that the front lever is closed.
8. Turn on the power supply of the host computer.
9. Several seconds after replacing the drive unit, data reconstruction will start. The drive status
indicator of the replacement drive unit will flash orange (@ 1 second interval).
Important
Do not remove the drive unit while data reconstruction is underway.
10. During data reconstruction, the drive status indicator of the replacement drive will flash orange,
while the drive status indicator of the fully functional drive unit will light green. The access
indicator will not light.
11. When data reconstruction is complete, the drive status indicator will go out.
12. If the drive status indicator of the replaced drive unit turns orange once again, repeat the
procedure, starting with step 2.
Important
If you have mistakenly replaced the correctly functioning drive unit,
the drive status indicator of both drive units will light green. Then the
access indicator will flash orange. The host computer will be unable
to operate the
SATA Mirror Drive
.
In this case, turn off the host computer. Replace the failed drive unit
with the new drive unit, and return the fully functional drive unit. Data
reconstruction will immediately start after turning on the host
computer.
20