Installation – Electricity Notes
Electrical Connection - Legal Requirements.
IMPORTANT:
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regula-
tions.
Important:
Ensure that you route all mains electrical
cables well clear of any adjacent heat source, such as
an oven or grill.
Warning:
This appliance must be earthed.
Where a fixed connection is used, a device allowing
the appliance to be isolated on all poles from the
mains supply with a contact opening width of at least
3mm must be provided.
The mains terminal block is positioned at the right
hand rear of the top service panel when viewed from
the back.
Connect the cable to the terminal block, and tighten
the cable clamp - remembering to fit the brass links as
shown in the diagram below.
Close the terminal box, ensuring that the cover is
engaged on the locking tabs.
After connection to the electricity supply please check
that all electrical parts of the appliance are working.
29
